6mm Dia. Metric Size Straight Shank/Flute Chucking Reamer (1 Each)
by RSC
New!: $14.39 (as of 01/31/2013 20:04 PST)
Reamers
- Rank: #281401 in BISS
- Brand: RSC
- Dimensions: .8 pounds
# 2/0 Taper Pin Reamer
The Alvord Polk 161-0 straight flute reamer is a square shank tool made of high-speed steel with no finish or coating, and is most commonly chosen for finish reaming Morse taper sockets. Morse taper is one of the most widely used standards for self-holding tools’ shanks and sockets.
Straight flute reamers are useful for uninterrupted cuts in general purpose applications. These reamers make small, circular, and precise enlargements to through and blind holes. High-speed steel is a general purpose steel for cutting tools and is compatible with many metalworking materials. It is often lower in price than other cutting tool materials. Square shanks prevent tool rotation in the toolholder.
For reamers in the 161-0 series with taper numbers 0 and 1 there are six flutes, for taper numbers 2 and 3 there are eight flutes, and for taper numbers 4 and 5 there are 10 flutes.
Reamers are used to finish existing holes. When holes are created using common applications like drilling or punching they often have minute imperfections. Their roundness may be flawed, or their diameter may be slightly smaller than required. Reamers are made to exacting tolerances, so they can correct such errors and create precisely round holes of exacting dimensions. Reaming is often used before tapping screw threads.
Alvord Polk manufactures a broad family of cutting tools, brushes, and tooling components, following ISO 9001 standards for quality and environmental impact of their products. Their offices and manufacturing facilities have been located in the United States since 1881.
For general purpose reaming to close tolerances. Also known as Machine Reamers.
The Alvord Polk 127-0 straight flute chucking reamer (also called a machine reamer) is a general purpose round shank tool made of high-speed steel with no finish or coating, and is most commonly chosen for general purpose reaming. This tool can be used in a drill press, screw machine, lathe, or other good-quality toolholder.
Straight flute reamers are useful for uninterrupted cuts in general purpose applications. These reamers make small, circular, and precise enlargements to through and blind holes. High-speed steel is a general purpose steel for cutting tools and is compatible with many metalworking materials. It is often lower in price than other cutting tool materials.
For reamers in the 127-0 series with 0.0280 – 0.1561 inches diameter there are four flutes, for 0.1562 – 0.5220 inches diameter there are six flutes, for 0.5221 – 0.8820 inches diameter there are eight flutes, for 0.8821 – 1.1950 inches diameter there are 10 flutes, and for 1.1951 – 1.5000 inches diameter, there are 12 flutes. Tolerances are +0.0002 -0.0000 inches for all reamers in the 127-0 series except for those that are dowel-pin sized, in which case tolerances are +0.0000 -0.0002 inches.
Reamers are used to finish existing holes. When holes are created using common applications like drilling or punching they often have minute imperfections. Their roundness may be flawed, or their diameter may be slightly smaller than required. Reamers are made to exacting tolerances, so they can correct such errors and create precisely round holes of exacting dimensions. Reaming is often used before tapping screw threads.
Alvord Polk manufactures a broad family of cutting tools, brushes, and tooling components, following ISO 9001 standards for quality and environmental impact of their products. Their offices and manufacturing facilities have been located in the United States since 1881.
The Alvord Polk 127-0 straight flute chucking reamer (also called a machine reamer) is a general purpose round shank tool made of high-speed steel with no finish or coating, and is most commonly chosen for general purpose reaming. This tool can be used in a drill press, screw machine, lathe, or other good-quality toolholder.
Straight flute reamers are useful for uninterrupted cuts in general purpose applications. These reamers make small, circular, and precise enlargements to through and blind holes. High-speed steel is a general purpose steel for cutting tools and is compatible with many metalworking materials. It is often lower in price than other cutting tool materials.
For reamers in the 127-0 series with 0.0280 – 0.1561 inches diameter there are four flutes, for 0.1562 – 0.5220 inches diameter there are six flutes, for 0.5221 – 0.8820 inches diameter there are eight flutes, for 0.8821 – 1.1950 inches diameter there are 10 flutes, and for 1.1951 – 1.5000 inches diameter, there are 12 flutes. Tolerances are +0.0002 -0.0000 inches for all reamers in the 127-0 series except for those that are dowel-pin sized, in which case tolerances are +0.0000 -0.0002 inches.
Reamers are used to finish existing holes. When holes are created using common applications like drilling or punching they often have minute imperfections. Their roundness may be flawed, or their diameter may be slightly smaller than required. Reamers are made to exacting tolerances, so they can correct such errors and create precisely round holes of exacting dimensions. Reaming is often used before tapping screw threads.
Alvord Polk manufactures a broad family of cutting tools, brushes, and tooling components, following ISO 9001 standards for quality and environmental impact of their products. Their offices and manufacturing facilities have been located in the United States since 1881.
Critchley type-Ideal for repair and automotive work. Takes the place of many individual size reamers. Can be used to progressively "open up" a hole.
For general purpose reaming to close tolerances. Also known as Machine Reamers.
The Alvord Polk 127-0 straight flute chucking reamer (also called a machine reamer) is a general purpose round shank tool made of high-speed steel with no finish or coating, and is most commonly chosen for general purpose reaming. This tool can be used in a drill press, screw machine, lathe, or other good-quality toolholder.
Straight flute reamers are useful for uninterrupted cuts in general purpose applications. These reamers make small, circular, and precise enlargements to through and blind holes. High-speed steel is a general purpose steel for cutting tools and is compatible with many metalworking materials. It is often lower in price than other cutting tool materials.
For reamers in the 127-0 series with 0.0280 – 0.1561 inches diameter there are four flutes, for 0.1562 – 0.5220 inches diameter there are six flutes, for 0.5221 – 0.8820 inches diameter there are eight flutes, for 0.8821 – 1.1950 inches diameter there are 10 flutes, and for 1.1951 – 1.5000 inches diameter, there are 12 flutes. Tolerances are +0.0002 -0.0000 inches for all reamers in the 127-0 series except for those that are dowel-pin sized, in which case tolerances are +0.0000 -0.0002 inches.
Reamers are used to finish existing holes. When holes are created using common applications like drilling or punching they often have minute imperfections. Their roundness may be flawed, or their diameter may be slightly smaller than required. Reamers are made to exacting tolerances, so they can correct such errors and create precisely round holes of exacting dimensions. Reaming is often used before tapping screw threads.
Alvord Polk manufactures a broad family of cutting tools, brushes, and tooling components, following ISO 9001 standards for quality and environmental impact of their products. Their offices and manufacturing facilities have been located in the United States since 1881.
The Alvord Polk 128-0 straight flute chucking reamer (also called a machine reamer) is a general purpose round shank tool made of cobalt steel with no finish or coating, and is most commonly chosen for reaming in high-temperatures generated by machining tough, hard materials applications, or with abrasive materials. Cobalt steel tools are good for machining stainless steel and nickel alloys, which are harder and generate more heat through friction, giving cobalt a longer-lasting sharp edge than an equivalent high-speed steel tool. This tool can be used in a drill press, screw machine, lathe, or other good-quality toolholder.
Straight flute reamers are useful for uninterrupted cuts in general purpose applications. These reamers make small, circular, and precise enlargements to through and blind holes. Cobalt steel is commonly chosen to make tools with exceptional wear resistance and temperature stability, and can be fed at higher rates than high-speed steel, while being more economical than carbide.
For reamers in the 128-0 series with 0.0280 – 0.1561 inches diameter there are four flutes, for 0.1562 – 0.5220 inches diameter there are six flutes, for 0.5221 – 0.8820 inches diameter there are eight flutes, for 0.8821 – 1.1950 inches diameter there are 10 flutes, and for 1.1951 – 1.5000 inches diameter, there are 12 flutes. Tolerances are +0.0002 -0.0000 inches for all reamers in the 128-0 series except for those that are dowel-pin sized, in which case tolerances are +0.0000 -0.0002 inches.
Reamers are used to finish an existing hole. These holes are often adequate, but in some engineering applications the resulting hole is not round enough or is incorrectly sized, and therefore reaming is necessary. Reaming positively affects the mechanical properties of the hole by producing a hole with an exceptionally smooth finish and precise roundness and diameter. Reaming is often used before tapping screw threads.
Alvord Polk manufactures a broad family of cutting tools, brushes, and tooling components, following ISO 9001 standards for quality and environmental impact of their products. Their offices and manufacturing facilities have been located in the United States since 1881.
The Alvord Polk 127-0 straight flute chucking reamer (also called a machine reamer) is a general purpose round shank tool made of high-speed steel with no finish or coating, and is most commonly chosen for general purpose reaming. This tool can be used in a drill press, screw machine, lathe, or other good-quality toolholder.
Straight flute reamers are useful for uninterrupted cuts in general purpose applications. These reamers make small, circular, and precise enlargements to through and blind holes. High-speed steel is a general purpose steel for cutting tools and is compatible with many metalworking materials. It is often lower in price than other cutting tool materials.
For reamers in the 127-0 series with 0.0280 – 0.1561 inches diameter there are four flutes, for 0.1562 – 0.5220 inches diameter there are six flutes, for 0.5221 – 0.8820 inches diameter there are eight flutes, for 0.8821 – 1.1950 inches diameter there are 10 flutes, and for 1.1951 – 1.5000 inches diameter, there are 12 flutes. Tolerances are +0.0002 -0.0000 inches for all reamers in the 127-0 series except for those that are dowel-pin sized, in which case tolerances are +0.0000 -0.0002 inches.
Reamers are used to finish existing holes. When holes are created using common applications like drilling or punching they often have minute imperfections. Their roundness may be flawed, or their diameter may be slightly smaller than required. Reamers are made to exacting tolerances, so they can correct such errors and create precisely round holes of exacting dimensions. Reaming is often used before tapping screw threads.
Alvord Polk manufactures a broad family of cutting tools, brushes, and tooling components, following ISO 9001 standards for quality and environmental impact of their products. Their offices and manufacturing facilities have been located in the United States since 1881.
The Alvord Polk 127-0 straight flute chucking reamer (also called a machine reamer) is a general purpose round shank tool made of high-speed steel with no finish or coating, and is most commonly chosen for general purpose reaming. This tool can be used in a drill press, screw machine, lathe, or other good-quality toolholder.
Straight flute reamers are useful for uninterrupted cuts in general purpose applications. These reamers make small, circular, and precise enlargements to through and blind holes. High-speed steel is a general purpose steel for cutting tools and is compatible with many metalworking materials. It is often lower in price than other cutting tool materials.
For reamers in the 127-0 series with 0.0280 – 0.1561 inches diameter there are four flutes, for 0.1562 – 0.5220 inches diameter there are six flutes, for 0.5221 – 0.8820 inches diameter there are eight flutes, for 0.8821 – 1.1950 inches diameter there are 10 flutes, and for 1.1951 – 1.5000 inches diameter, there are 12 flutes. Tolerances are +0.0002 -0.0000 inches for all reamers in the 127-0 series except for those that are dowel-pin sized, in which case tolerances are +0.0000 -0.0002 inches.
Reamers are used to finish existing holes. When holes are created using common applications like drilling or punching they often have minute imperfections. Their roundness may be flawed, or their diameter may be slightly smaller than required. Reamers are made to exacting tolerances, so they can correct such errors and create precisely round holes of exacting dimensions. Reaming is often used before tapping screw threads.
Alvord Polk manufactures a broad family of cutting tools, brushes, and tooling components, following ISO 9001 standards for quality and environmental impact of their products. Their offices and manufacturing facilities have been located in the United States since 1881.
A rotary cutting tool with one or more cutting elements, used for enlarging to size and contour of a previously formed hole.
The Alvord Polk 827-0 right-hand spiral CNC length chucking reamer is a round shank tool made of tungsten carbide, and is most commonly chosen for reaming abrasive materials such as cast iron. This tool is meant for use in a CNC machine at high rpms with reduced vibration and increased accuracy compared to a longer tool. Less vibration means more precision.
Straight flute reamers are useful for uninterrupted cuts in general purpose applications. These reamers make small, circular, and precise enlargements to through and blind holes.
For reamers in the 827-0 series with 0.0280 to 0.1910 inches diameter there are four flutes, and for 0.1915 to 0.5010 there are six flutes. Tolerances are +0.0002 -0.0000 inches for all reamers in the 827-0 series.
Reamers are used to finish existing holes. When holes are created using common applications like drilling or punching they often have minute imperfections. Their roundness may be flawed, or their diameter may be slightly smaller than required. Reamers are made to exacting tolerances, so they can correct such errors and create precisely round holes of exacting dimensions. Reaming is often used before tapping screw threads.
Alvord Polk manufactures a broad family of cutting tools, brushes, and tooling components, following ISO 9001 standards for quality and environmental impact of their products. Their offices and manufacturing facilities have been located in the United States since 1881.
For general purpose reaming to close tolerances. Also known as Machine Reamers.
A rotary cutting tool with one or more cutting elements, used for enlarging to size and contour of a previously formed hole.