Alvord Polk 127-1 High-Speed Steel Chucking Reamer, Right Hand Spiral Flute, Round Shank, Uncoated Finish, Size: 8.0 mm

Buy on the merchant's website searching and read reviews. If you're making an attempt to search out Alvord Polk 127-1 High-Speed Steel Chucking Reamer, Right Hand Spiral Flute, Round Shank, Uncoated Finish, Size: 8.0 mm with special value. This is the most effective price for you. Where you may notice these item is by on-line searching stores? Read the review on Alvord Polk 127-1 High-Speed Steel Chucking Reamer, Right Hand Spiral Flute, Round Shank, Uncoated Finish, Size: 8.0 mm Now, it's the simplest worth. So don't lose it.


Alvord Polk 127-1 High-Speed Steel Chucking Reamer, Right Hand Spiral Flute, Round Shank, Uncoated Finish, Size: 8.0 mm
by Alvord Polk
(1)

New!: $24.90 (as of 12/31/2012 16:47 PST)

Reamers

The Alvord Polk 127-1 right-hand spiral chucking reamer (also called a machine reamer) is a general purpose round shank tool made of high-speed steel with no finish or coating, and is most commonly chosen for reaming interrupted cuts. This tool can be used in a drill press, screw machine, lathe, or other good-quality toolholder.

Right-hand spiral reamers are useful for interrupted cuts and in blind holes. Spiral reamers prevent whole flute contact with the leading edge in an interrupted cut, as in a keyway. This prevents damage to the interruption and the reamer flute. Right-hand spiral style tools also pull chips away from the tip of the tool, instead of driving chips in front of the tool. Right-hand spiral reamers are also useful when reaming blind holes, since pulling chips out of the hole prevents clogging, which may cause tool damage.

For reamers in the 127-1 series with 0.0280 – 0.1561 inches diameter there are four flutes, for 0.1562 – 0.5220 inches diameter there are six flutes, for 0.5221 – 0.8820 inches diameter there are eight flutes, for 0.8821 – 1.1950 inches diameter there are 10 flutes, and for 1.1951 – 1.5000 inches diameter, there are 12 flutes. Tolerances are +0.0002 -0.0000 inches for all reamers in the 127-1 series except for those that are dowel-pin sized, in which case tolerances are +0.0000 -0.0002 inches.

Reamers are used to finish existing holes. When holes are created using common applications like drilling or punching they often have minute imperfections. Their roundness may be flawed, or their diameter may be slightly smaller than required. Reamers are made to exacting tolerances, so they can correct such errors and create precisely round holes of exacting dimensions. Reaming is often used before tapping screw threads. Reaming is often used before tapping screw threads.

Alvord Polk manufactures a broad family of cutting tools, brushes, and tooling components, following ISO 9001 standards for quality and environmental impact of their products. Their offices and manufacturing facilities have been located in the United States since 1881.

• Rank: #69224 in BISS
• Size: 8.0 mm
• Brand: Alvord Polk
• Model: 01144
• Number of items: 1

• Right-hand spiral reamers are good for use in blind holes (holes that do not extend all the way through a workpiece), as they pull chips up and out of the hole
• Spiral flute reamers are recommended for reaming holes with interruptions, as they prevent damage to the workpiece edge and tool
• Round shank tools are cylindrical and should be held in a good-quality toolholder in order to prevent the reamer from slipping in high torque applications, which can cause tool freeze, loss of accuracy, and tool damage
• (bright) tools have no finish or coating. They are a good choice for general purpose applications
• High-speed steel is a common general purpose steel for cutting tools, is compatible with a variety of materials, and tends to be lower in price than cobalt steel or carbide

Alvord Polk 627-2 High-Speed Steel Bridge Reamer, Left Hand Spiral Flute, #2 Morse Taper Shank, Uncoated (Bright) Finish, Size 1/2 Inch

Buy on the merchant's on-line shopping and browse reviews. If you're making an attempt to search out Alvord Polk 627-2 High-Speed Steel Bridge Reamer, Left Hand Spiral Flute, #2 Morse Taper Shank, Uncoated (Bright) Finish, Size 1/2 Inch with discount price. This is the simplest deal for you. Where you may notice these item is by online shopping stores? Read the review on Alvord Polk 627-2 High-Speed Steel Bridge Reamer, Left Hand Spiral Flute, #2 Morse Taper Shank, Uncoated (Bright) Finish, Size 1/2 Inch Now, it's special value. Therefore don't lose it.


Alvord Polk 627-2 High-Speed Steel Bridge Reamer, Left Hand Spiral Flute, #2 Morse Taper Shank, Uncoated (Bright) Finish, Size 1/2 Inch
by Alvord Polk



Reamers

The Alvord Polk 627-2 left hand spiral flute construction reamer is a Morse taper shank tool made of high-speed steel with no finish or coating, and is most commonly chosen for reaming interrupted cuts in structural steel. Construction reamers are tapered to allow the reamer to enter overlapping and misaligned holes where extremely precise tolerances are not necessary, and have a stop collar for safety and depth control.

Left-hand spiral reamers are useful for interrupted cuts and in through holes. Spiral reamers prevent whole flute contact with the leading edge in an interrupted cut, as in a keyway. This prevents damage to the interruption and reamer flute. Left-hand spiral style tools also push chips ahead of the tip of the tool, instead of pulling chips out of a hole. Left-hand spiral reamers are also useful when reaming through holes, since pushing chips into the hole can cause clogging, which may damage the tool. High-speed steel is a general purpose steel for cutting tools and is compatible with many metalworking materials. It is often lower in price than other cutting tool materials. Taper shank tools can be self-holding or self-releasing based on the degree of taper – small tapers are self-holding within the toolholder, while large tapers are self-releasing and will easily release from the toolholder. The end of Morse taper shank tools (held in a toolholder) is tapered to ensure accurate alignment of the tool in its socket and is self-holding (friction between the tool and the tool-holder prevents slippage). Morse taper is one of the most widely used standards for self-holding tapers.

For reamers in the 627-2 series with 0.3750 to 0.9375 inches diameter there are five flutes, and for 1.0000 to 1.5000 there are six flutes. Tolerances are +0.0030/+0.0060 inches for all reamers in the 627-2 series.

Reamers are used to finish existing holes. When holes are created using common applications like drilling or punching they often have minute imperfections. Their roundness may be flawed, or their diameter may be slightly smaller than required. Reamers are made to exacting tolerances, so they can correct such errors and create precisely round holes of exacting dimensions. Reaming is often used before tapping screw threads.

Alvord Polk manufactures a broad family of cutting tools, brushes, and tooling components, following ISO 9001 standards for quality and environmental impact of their products. Their offices and manufacturing facilities have been located in the United States since 1881.

• Rank: #4057 in BISS
• Size: 9/16"
• Brand: Alvord Polk
• Model: 60902
• Number of items: 1

• Left-hand spiral reamers are good for use in through holes (holes that extend all the way through a workpiece), as they push chips ahead of the tool and into the hole
• Spiral reamers are recommended for reaming holes with interruptions, as they prevent damage to the workpiece edge and tool
• The end of Morse taper shank tools (held in a toolholder) is tapered to ensure accurate alignment of the tool in its socket and is self-holding (friction between the tool and the tool-holder prevents slippage)
• Uncoated (bright) tools have no finish or coating. They are a good choice for general purpose applications
• High-speed steel is a common general purpose steel for cutting tools, is compatible with a variety of materials, and tends to be lower in price than cobalt steel or carbide

Alvord Polk 127-0 High-Speed Steel Chucking Reamer, Straight Flute, Round Shank, Uncoated Finish, Size: 1/8"

Buy on the merchant's online shopping and read reviews. If you are attempting to search out Alvord Polk 127-0 High-Speed Steel Chucking Reamer, Straight Flute, Round Shank, Uncoated Finish, Size: 1/8" with special value. This is the most effective price for you. Where you may notice these item is by online shopping stores? Read the review on Alvord Polk 127-0 High-Speed Steel Chucking Reamer, Straight Flute, Round Shank, Uncoated Finish, Size: 1/8" Now, it's discount price. Thus do not lose it.


Alvord Polk 127-0 High-Speed Steel Chucking Reamer, Straight Flute, Round Shank, Uncoated Finish, Size: 1/8"
by Alvord Polk
(1)

New!: $10.00 $8.01 (as of 12/30/2012 23:54 PST)

Reamers

The Alvord Polk 127-0 straight flute chucking reamer (also called a machine reamer) is a general purpose round shank tool made of high-speed steel with no finish or coating, and is most commonly chosen for general purpose reaming. This tool can be used in a drill press, screw machine, lathe, or other good-quality toolholder.

Straight flute reamers are useful for uninterrupted cuts in general purpose applications. These reamers make small, circular, and precise enlargements to through and blind holes. High-speed steel is a general purpose steel for cutting tools and is compatible with many metalworking materials. It is often lower in price than other cutting tool materials.

For reamers in the 127-0 series with 0.0280 – 0.1561 inches diameter there are four flutes, for 0.1562 – 0.5220 inches diameter there are six flutes, for 0.5221 – 0.8820 inches diameter there are eight flutes, for 0.8821 – 1.1950 inches diameter there are 10 flutes, and for 1.1951 – 1.5000 inches diameter, there are 12 flutes. Tolerances are +0.0002 -0.0000 inches for all reamers in the 127-0 series except for those that are dowel-pin sized, in which case tolerances are +0.0000 -0.0002 inches.

Reamers are used to finish existing holes. When holes are created using common applications like drilling or punching they often have minute imperfections. Their roundness may be flawed, or their diameter may be slightly smaller than required. Reamers are made to exacting tolerances, so they can correct such errors and create precisely round holes of exacting dimensions. Reaming is often used before tapping screw threads.

Alvord Polk manufactures a broad family of cutting tools, brushes, and tooling components, following ISO 9001 standards for quality and environmental impact of their products. Their offices and manufacturing facilities have been located in the United States since 1881.

• Rank: #2270 in BISS
• Size: 1/8" (0.1250")
• Brand: Alvord Polk
• Model: 00161
• Number of items: 1

• Straight flute reamers are recommended for general purpose reaming to make minor enlargements to existing holes with a very precise size and roundness
• Straight flute reamers are good for use in through or blind holes without interruptions such as keyways (through holes extend through the entire workpiece, while blind holes do not)
• Round shank tools are cylindrical and should be held in a good-quality toolholder in order to prevent the reamer from slipping in high torque applications, which can cause tool freeze, loss of accuracy, and tool damage
• Uncoated (bright) tools have no finish or coating. They are a good choice for general purpose applications
• High-speed steel is a common general purpose steel for cutting tools, is compatible with a variety of materials, and tends to be lower in price than cobalt steel or carbide

Union Butterfield 4533 High-Speed Steel Chucking Reamer, Straight Flute, Round Shank, Uncoated (Bright), 7/8 inch

Buy on the merchant's online shopping and scan reviews. If you're making an attempt to seek out Union Butterfield 4533 High-Speed Steel Chucking Reamer, Straight Flute, Round Shank, Uncoated (Bright), 7/8 inch with discount price. This is the simplest price for you. Where you may realize these item is by on-line looking stores? Read the review on Union Butterfield 4533 High-Speed Steel Chucking Reamer, Straight Flute, Round Shank, Uncoated (Bright), 7/8 inch Now, it's discount deals. So don't lose it.


Union Butterfield 4533 High-Speed Steel Chucking Reamer, Straight Flute, Round Shank, Uncoated (Bright), 7/8 inch
by Union Butterfield

New!: $101.00 $67.52 (as of 12/28/2012 21:33 PST)

Reamers

The Union Butterfield 4533 high-speed steel straight flute chucking reamer (also called a machine reamer) is an uncoated (bright) round shank tool with a 45-degree bevel lead, commonly used for general-purpose reaming of uninterrupted cuts. This tool is often used in a drill press, screw machine or lathe. Straight flute reamers are useful for uninterrupted cuts in general-purpose applications. They make small, circular, and precise enlargements to through holes (extending through the workpiece) and blind holes (with only one opening). They can be used on a wide variety of materials including cast iron, aluminum, and tool steel. High-speed steel is a general-purpose steel for cutting tools and is compatible with many metalworking materials. It is often lower in price than other cutting tool substrates. Like most non-tapered chucking reamers, the Union Butterfield 4533 has a 45-degree bevel at the cutting tip that facilitates entry to a pre-drilled hole.

In the Union Butterfield 4533 series, reamers 0.0400 to 0.1540” diameter have four flutes reamers 0.1562 to 0.5312” diameter have six flutes, and reamers 0.5469 to 1.5000” diameter have eight flutes. Tolerances for reamers up to 0.5000” are +0.0002 to -0.0000”; larger than 0.5000” and up to 0.7500” are +0.0003 to -0.0000”, and larger than 0.7500” up to 1.5000” are +0.0004 to -0.0000”. There is an exception for reamers that are dowel-pin sized, in which cases tolerances are +0.0000 to -0.0002”.

Reamers are used to finish existing holes. When holes are created using common applications such as drilling or punching, they often have minute imperfections. Their roundness may be flawed, or their diameters may be slightly smaller than required. Reamers are made to exacting tolerances, so they can correct such errors and create precisely round holes with exact dimensions. Reaming is often used before tapping screw threads.

Union Butterfield manufactures a range of machine tools, including drills, reamers, taps, dies, end mills, and made-to-order items. Formed in 1913, the company is a subsidiary of Sandvik, a Swedish machine tool corporation. Union Butterfield offices and manufacturing facilities are located in the United States.

• Rank: #8764 in BISS
• Size: 7/8"
• Brand: Union Butterfield
• Model: 5010717
• Number of items: 1

• Straight flute for general-purpose reaming of uninterrupted cuts in through holes and blind holes
• High-speed steel is compatible with a variety of materials
• Uncoated (bright) tools have no additional surface treatment or coating, suitable for general-purpose applications
• 45-degree bevel at the cutting tip facilitates entry to a pre-drilled hole
• Round shank aids accurate centering; designed to be held in a chuck or collet for high-torque applications