6mm Dia. Metric Size Straight Shank/Flute Chucking Reamer (1 Each)

6mm Dia. Metric Size Straight Shank/Flute Chucking Reamer (1 Each)
by RSC

New!: $14.39 (as of 01/31/2013 20:04 PST)

Reamers

• Rank: #281401 in BISS
• Brand: RSC
• Dimensions: .8 pounds

# 2/0 Taper Pin Reamer

# 2/0 Taper Pin Reamer
by Champion Cutting Tool Corp.

New!: $23.38 (as of 01/31/2013 05:16 PST)

Reamers

# 2/0 Taper Pin Reamer

• Brand: Champion Cutting Tool Corp.
• Number of items: 1

Alvord Polk 161-0 High-Speed Steel Finishing Reamer for Morse Taper Sockets, Straight Flute, Square Shank, Uncoated Finish, Morse Taper Size 2

Buy on the merchant's on-line searching and scan reviews. If you are making an attempt to search out Alvord Polk 161-0 High-Speed Steel Finishing Reamer for Morse Taper Sockets, Straight Flute, Square Shank, Uncoated Finish, Morse Taper Size 2 with special deal. This is the simplest deals for you. Where you could find these item is by online searching stores? Read the review on Alvord Polk 161-0 High-Speed Steel Finishing Reamer for Morse Taper Sockets, Straight Flute, Square Shank, Uncoated Finish, Morse Taper Size 2 Now, it's discount value. Thus don't lose it.


Alvord Polk 161-0 High-Speed Steel Finishing Reamer for Morse Taper Sockets, Straight Flute, Square Shank, Uncoated Finish, Morse Taper Size 2
by Alvord Polk

New!: $94.10 $63.46 (as of 01/30/2013 18:45 PST)

Reamers

The Alvord Polk 161-0 straight flute reamer is a square shank tool made of high-speed steel with no finish or coating, and is most commonly chosen for finish reaming Morse taper sockets. Morse taper is one of the most widely used standards for self-holding tools’ shanks and sockets.

Straight flute reamers are useful for uninterrupted cuts in general purpose applications. These reamers make small, circular, and precise enlargements to through and blind holes. High-speed steel is a general purpose steel for cutting tools and is compatible with many metalworking materials. It is often lower in price than other cutting tool materials. Square shanks prevent tool rotation in the toolholder.

For reamers in the 161-0 series with taper numbers 0 and 1 there are six flutes, for taper numbers 2 and 3 there are eight flutes, and for taper numbers 4 and 5 there are 10 flutes.

Reamers are used to finish existing holes. When holes are created using common applications like drilling or punching they often have minute imperfections. Their roundness may be flawed, or their diameter may be slightly smaller than required. Reamers are made to exacting tolerances, so they can correct such errors and create precisely round holes of exacting dimensions. Reaming is often used before tapping screw threads.

Alvord Polk manufactures a broad family of cutting tools, brushes, and tooling components, following ISO 9001 standards for quality and environmental impact of their products. Their offices and manufacturing facilities have been located in the United States since 1881.

• Rank: #11916 in BISS
• Size: Morse Taper Size 2
• Brand: Alvord Polk
• Model: 72004
• Number of items: 1

• Straight flute reamers are recommended for general purpose reaming to make minor enlargements to preformed holes with a very precise size and roundness
• Straight flute reamers are good for use in through or blind holes without interruptions such as keyways (through holes extend through the entire workpiece, while blind holes do not)
• The cutting end of Morse taper reamers fits the Morse taper standard for sockets and shanks, which means that it will finish a tapered hole correctly according to this standard
• Uncoated (bright) tools have no finish or coating. They are a good choice for general purpose applications
• High-speed steel is a common general purpose steel for cutting tools, is compatible with a variety of materials, and tends to be lower in price

HSS 5/8" Chucking Reamer - Straight Shank, Spiral Flute (RH)

Buy on the merchant's website looking and scan reviews. If you are trying to seek out HSS 5/8" Chucking Reamer - Straight Shank, Spiral Flute (RH) with discount deal. This is the simplest deal for you. Where you'll find these item is by on-line searching stores? Read the review on HSS 5/8" Chucking Reamer - Straight Shank, Spiral Flute (RH) Now, it's discount value. So don't lose it.


HSS 5/8" Chucking Reamer - Straight Shank, Spiral Flute (RH)
by Meda - Superior Import

New!: $17.15 (as of 01/30/2013 06:03 PST)

Reamers

For general purpose reaming to close tolerances. Also known as Machine Reamers.

• Rank: #41656 in BISS
• Brand: Meda - Superior Import

• High Speed Steel
• .6250" Diameter
• 2 1/4" Flute Length
• 9" Overall Length

RMBL-A High Speed Steel Adjustable Blade Reamer, 15/32"-17/32"

Buy on the merchant's on-line shopping and read reviews. If you're attempting to find RMBL-A High Speed Steel Adjustable Blade Reamer, 15/32"-17/32" with discount price. This is the most effective price for you. Where you'll notice these item is by on-line looking stores? Read the review on RMBL-A High Speed Steel Adjustable Blade Reamer, 15/32"-17/32" Now, it's discount deals. Thus don't lose it.


RMBL-A High Speed Steel Adjustable Blade Reamer, 15/32"-17/32"
by Hand Adjustable Reamers

New!: $17.00 (as of 01/18/2013 07:50 PST)

Reamers

Alvord Polk 650-S-03 High-Speed Steel Construction Taper Reamer Set, Helical Flute, Round Shank with Taper Shank Adapter, Uncoated Finish, 4-Piece (1/2 Inch, 5/8 Inch, 3/4 Inch, 1 Inch) in Wood Case

Buy on the merchant's online searching and scan reviews. If you are attempting to find Alvord Polk 650-S-03 High-Speed Steel Construction Taper Reamer Set, Helical Flute, Round Shank with Taper Shank Adapter, Uncoated Finish, 4-Piece (1/2 Inch, 5/8 Inch, 3/4 Inch, 1 Inch) in Wood Case with special value. This is the most effective price for you. Where you'll notice these item is by online searching stores? Read the review on Alvord Polk 650-S-03 High-Speed Steel Construction Taper Reamer Set, Helical Flute, Round Shank with Taper Shank Adapter, Uncoated Finish, 4-Piece (1/2 Inch, 5/8 Inch, 3/4 Inch, 1 Inch) in Wood Case Now, it's the simplest deals. Therefore do not lose it.


Alvord Polk 650-S-03 High-Speed Steel Construction Taper Reamer Set, Helical Flute, Round Shank with Taper Shank Adapter, Uncoated Finish, 4-Piece (1/2 Inch, 5/8 Inch, 3/4 Inch, 1 Inch) in Wood Case
by Alvord Polk
(1)

New!: $304.80 $151.41 (as of 01/17/2013 15:02 PST)

Reamers

• Rank: #4884 in BISS
• Size: 1/2", 5/8", 3/4", 1"
• Brand: Alvord Polk
• Model: 08123
• Number of items: 1

Alvord Polk 127-0 High-Speed Steel Chucking Reamer, Straight Flute, Round Shank, Uncoated Finish, Decimal Size: 0.4725"

Buy on the merchant's website searching and read reviews. If you are attempting to search out Alvord Polk 127-0 High-Speed Steel Chucking Reamer, Straight Flute, Round Shank, Uncoated Finish, Decimal Size: 0.4725" with the simplest deals. This is the most effective price for you. Where you may find these item is by on-line searching stores? Read the review on Alvord Polk 127-0 High-Speed Steel Chucking Reamer, Straight Flute, Round Shank, Uncoated Finish, Decimal Size: 0.4725" Now, it's special deals. Thus do not lose it.


Alvord Polk 127-0 High-Speed Steel Chucking Reamer, Straight Flute, Round Shank, Uncoated Finish, Decimal Size: 0.4725"
by Alvord Polk
(1)

New!: $34.40 (as of 01/17/2013 04:07 PST)

Reamers

The Alvord Polk 127-0 straight flute chucking reamer (also called a machine reamer) is a general purpose round shank tool made of high-speed steel with no finish or coating, and is most commonly chosen for general purpose reaming. This tool can be used in a drill press, screw machine, lathe, or other good-quality toolholder.

Straight flute reamers are useful for uninterrupted cuts in general purpose applications. These reamers make small, circular, and precise enlargements to through and blind holes. High-speed steel is a general purpose steel for cutting tools and is compatible with many metalworking materials. It is often lower in price than other cutting tool materials.

For reamers in the 127-0 series with 0.0280 – 0.1561 inches diameter there are four flutes, for 0.1562 – 0.5220 inches diameter there are six flutes, for 0.5221 – 0.8820 inches diameter there are eight flutes, for 0.8821 – 1.1950 inches diameter there are 10 flutes, and for 1.1951 – 1.5000 inches diameter, there are 12 flutes. Tolerances are +0.0002 -0.0000 inches for all reamers in the 127-0 series except for those that are dowel-pin sized, in which case tolerances are +0.0000 -0.0002 inches.

Reamers are used to finish existing holes. When holes are created using common applications like drilling or punching they often have minute imperfections. Their roundness may be flawed, or their diameter may be slightly smaller than required. Reamers are made to exacting tolerances, so they can correct such errors and create precisely round holes of exacting dimensions. Reaming is often used before tapping screw threads.

Alvord Polk manufactures a broad family of cutting tools, brushes, and tooling components, following ISO 9001 standards for quality and environmental impact of their products. Their offices and manufacturing facilities have been located in the United States since 1881.

• Rank: #4961 in BISS
• Size: 0.4725"
• Brand: Alvord Polk
• Model: 12606
• Number of items: 1

• Straight flute reamers are recommended for general purpose reaming to make minor enlargements to existing holes with a very precise size and roundness
• Straight flute reamers are good for use in through or blind holes without interruptions such as keyways (through holes extend through the entire workpiece, while blind holes do not)
• Round shank tools are cylindrical and should be held in a good-quality toolholder in order to prevent the reamer from slipping in high torque applications, which can cause tool freeze, loss of accuracy, and tool damage
• Uncoated (bright) tools have no finish or coating. They are a good choice for general purpose applications
• High-speed steel is a common general purpose steel for cutting tools, is compatible with a variety of materials, and tends to be lower in price than cobalt steel or carbide

Alvord Polk 127-0 High-Speed Steel Chucking Reamer, Straight Flute, Round Shank, Uncoated Finish, Decimal Size: 0.2935"

Buy on the merchant's website searching and browse reviews. If you're attempting to seek out Alvord Polk 127-0 High-Speed Steel Chucking Reamer, Straight Flute, Round Shank, Uncoated Finish, Decimal Size: 0.2935" with discount deal. This is the simplest deal for you. Where you may realize these item is by on-line shopping stores? Read the review on Alvord Polk 127-0 High-Speed Steel Chucking Reamer, Straight Flute, Round Shank, Uncoated Finish, Decimal Size: 0.2935" Now, it's the simplest worth. Thus do not lose it.


Alvord Polk 127-0 High-Speed Steel Chucking Reamer, Straight Flute, Round Shank, Uncoated Finish, Decimal Size: 0.2935"
by Alvord Polk
(1)

New!: $25.70 (as of 01/16/2013 17:41 PST)

Reamers

The Alvord Polk 127-0 straight flute chucking reamer (also called a machine reamer) is a general purpose round shank tool made of high-speed steel with no finish or coating, and is most commonly chosen for general purpose reaming. This tool can be used in a drill press, screw machine, lathe, or other good-quality toolholder.

Straight flute reamers are useful for uninterrupted cuts in general purpose applications. These reamers make small, circular, and precise enlargements to through and blind holes. High-speed steel is a general purpose steel for cutting tools and is compatible with many metalworking materials. It is often lower in price than other cutting tool materials.

For reamers in the 127-0 series with 0.0280 – 0.1561 inches diameter there are four flutes, for 0.1562 – 0.5220 inches diameter there are six flutes, for 0.5221 – 0.8820 inches diameter there are eight flutes, for 0.8821 – 1.1950 inches diameter there are 10 flutes, and for 1.1951 – 1.5000 inches diameter, there are 12 flutes. Tolerances are +0.0002 -0.0000 inches for all reamers in the 127-0 series except for those that are dowel-pin sized, in which case tolerances are +0.0000 -0.0002 inches.

Reamers are used to finish existing holes. When holes are created using common applications like drilling or punching they often have minute imperfections. Their roundness may be flawed, or their diameter may be slightly smaller than required. Reamers are made to exacting tolerances, so they can correct such errors and create precisely round holes of exacting dimensions. Reaming is often used before tapping screw threads.

Alvord Polk manufactures a broad family of cutting tools, brushes, and tooling components, following ISO 9001 standards for quality and environmental impact of their products. Their offices and manufacturing facilities have been located in the United States since 1881.

• Rank: #12687 in BISS
• Size: 0.2935"
• Brand: Alvord Polk
• Model: 10728
• Number of items: 1

• Straight flute reamers are recommended for general purpose reaming to make minor enlargements to existing holes with a very precise size and roundness
• Straight flute reamers are good for use in through or blind holes without interruptions such as keyways (through holes extend through the entire workpiece, while blind holes do not)
• Round shank tools are cylindrical and should be held in a good-quality toolholder in order to prevent the reamer from slipping in high torque applications, which can cause tool freeze, loss of accuracy, and tool damage
• Uncoated (bright) tools have no finish or coating. They are a good choice for general purpose applications
• High-speed steel is a common general purpose steel for cutting tools, is compatible with a variety of materials, and tends to be lower in price than cobalt steel or carbide

0.245, Chucking Reamers, Intermediate Size, HSS

Buy on the merchant's on-line looking and read reviews. If you're attempting to find 0.245, Chucking Reamers, Intermediate Size, HSS with discount price. This is the simplest deals for you. Where you could find these item is by online looking stores? Read the review on 0.245, Chucking Reamers, Intermediate Size, HSS Now, it's discount worth. So don't lose it.


0.245, Chucking Reamers, Intermediate Size, HSS
by Atlas

New!: $32.07 $17.11 (as of 01/16/2013 06:29 PST)

Reamers

• Rank: #84224 in Home Improvement
• Brand: Atlas

• 0.245 DIAMETER - A51885
• Chucking Reamers
• Intermediate Size
• HSS

Alvord Polk 127-S-19 High-Speed Steel Chucking Reamer Set, Straight Flute, Uncoated Finish, 14-Piece, 1/8 Inch - 1/2 Inch Oversize and Undersize

Buy on the merchant's online looking and read reviews. If you are attempting to seek out Alvord Polk 127-S-19 High-Speed Steel Chucking Reamer Set, Straight Flute, Uncoated Finish, 14-Piece, 1/8 Inch - 1/2 Inch Oversize and Undersize with discount price. This is the most effective price for you. Where you could find these item is by on-line shopping stores? Read the review on Alvord Polk 127-S-19 High-Speed Steel Chucking Reamer Set, Straight Flute, Uncoated Finish, 14-Piece, 1/8 Inch - 1/2 Inch Oversize and Undersize Now, it's special price. Thus do not lose it.


Alvord Polk 127-S-19 High-Speed Steel Chucking Reamer Set, Straight Flute, Uncoated Finish, 14-Piece, 1/8 Inch - 1/2 Inch Oversize and Undersize
by Alvord Polk

New!: $400.90 $194.28 (as of 01/15/2013 20:02 PST)

Reamers

• Rank: #6339 in BISS
• Brand: Alvord Polk
• Model: 10181
• Number of items: 1

RMBL-H High Speed Steel Adjustable Blade Reamer, 15/16"-1 1/16"

Buy on the merchant's online shopping and read reviews. If you are making an attempt to find RMBL-H High Speed Steel Adjustable Blade Reamer, 15/16"-1 1/16" with the simplest deal. This is the simplest deals for you. Where you may realize these item is by online looking stores? Read the review on RMBL-H High Speed Steel Adjustable Blade Reamer, 15/16"-1 1/16" Now, it's the simplest value. Thus do not lose it.


RMBL-H High Speed Steel Adjustable Blade Reamer, 15/16"-1 1/16"
by Hand Adjustable Reamers

New!: $26.90 (as of 01/15/2013 02:22 PST)

Reamers

Critchley type-Ideal for repair and automotive work. Takes the place of many individual size reamers. Can be used to progressively "open up" a hole.

• Rank: #67782 in Home Improvement
• Brand: Hand Adjustable Reamers
• Dimensions: 1.25 pounds

• Size: H
• Range: 15/16"-1 1/16"

HSS 2" Chucking Reamer - Straight Shank, Straight Flute

Buy on the merchant's on-line searching and scan reviews. If you are trying to find HSS 2" Chucking Reamer - Straight Shank, Straight Flute with discount deal. This is the simplest deal for you. Where you could find these item is by on-line looking stores? Read the review on HSS 2" Chucking Reamer - Straight Shank, Straight Flute Now, it's discount price. Therefore do not lose it.


HSS 2" Chucking Reamer - Straight Shank, Straight Flute
by Meda - Superior Import

New!: $171.60 (as of 01/14/2013 15:55 PST)

Reamers

For general purpose reaming to close tolerances. Also known as Machine Reamers.

• Rank: #12643 in BISS
• Brand: Meda - Superior Import

• High Speed Steel
• 2.000" Diameter
• 4" Flute Length
• 14" Overall Length

Alvord Polk 127-0 High-Speed Steel Chucking Reamer, Straight Flute, Round Shank, Uncoated Finish, Size: 1/4" Oversize

Buy on the merchant's online shopping and browse reviews. If you are making an attempt to find Alvord Polk 127-0 High-Speed Steel Chucking Reamer, Straight Flute, Round Shank, Uncoated Finish, Size: 1/4" Oversize with discount deal. This is the simplest deal for you. Where you'll notice these item is by on-line searching stores? Read the review on Alvord Polk 127-0 High-Speed Steel Chucking Reamer, Straight Flute, Round Shank, Uncoated Finish, Size: 1/4" Oversize Now, it's discount value. Thus don't lose it.


Alvord Polk 127-0 High-Speed Steel Chucking Reamer, Straight Flute, Round Shank, Uncoated Finish, Size: 1/4" Oversize
by Alvord Polk
(1)

New!: $17.40 $13.40 (as of 01/13/2013 23:19 PST)

Reamers

The Alvord Polk 127-0 straight flute chucking reamer (also called a machine reamer) is a general purpose round shank tool made of high-speed steel with no finish or coating, and is most commonly chosen for general purpose reaming. This tool can be used in a drill press, screw machine, lathe, or other good-quality toolholder.

Straight flute reamers are useful for uninterrupted cuts in general purpose applications. These reamers make small, circular, and precise enlargements to through and blind holes. High-speed steel is a general purpose steel for cutting tools and is compatible with many metalworking materials. It is often lower in price than other cutting tool materials.

For reamers in the 127-0 series with 0.0280 – 0.1561 inches diameter there are four flutes, for 0.1562 – 0.5220 inches diameter there are six flutes, for 0.5221 – 0.8820 inches diameter there are eight flutes, for 0.8821 – 1.1950 inches diameter there are 10 flutes, and for 1.1951 – 1.5000 inches diameter, there are 12 flutes. Tolerances are +0.0002 -0.0000 inches for all reamers in the 127-0 series except for those that are dowel-pin sized, in which case tolerances are +0.0000 -0.0002 inches.

Reamers are used to finish existing holes. When holes are created using common applications like drilling or punching they often have minute imperfections. Their roundness may be flawed, or their diameter may be slightly smaller than required. Reamers are made to exacting tolerances, so they can correct such errors and create precisely round holes of exacting dimensions. Reaming is often used before tapping screw threads.

Alvord Polk manufactures a broad family of cutting tools, brushes, and tooling components, following ISO 9001 standards for quality and environmental impact of their products. Their offices and manufacturing facilities have been located in the United States since 1881.

• Rank: #17650 in BISS
• Size: 1/4" Oversize
• Brand: Alvord Polk
• Model: 00054
• Number of items: 1

• Straight flute reamers are recommended for general purpose reaming to make minor enlargements to existing holes with a very precise size and roundness
• Straight flute reamers are good for use in through or blind holes without interruptions such as keyways (through holes extend through the entire workpiece, while blind holes do not)
• Round shank tools are cylindrical and should be held in a good-quality toolholder in order to prevent the reamer from slipping in high torque applications, which can cause tool freeze, loss of accuracy, and tool damage
• Uncoated (bright) tools have no finish or coating. They are a good choice for general purpose applications
• High-speed steel is a common general purpose steel for cutting tools, is compatible with a variety of materials, and tends to be lower in price than cobalt steel or carbide

Alvord Polk 128-0 Cobalt Steel Chucking Reamer, Straight Flute, Round Shank, Uncoated Finish, Size: 1/4 Inch Oversize

Buy on the merchant's on-line shopping and scan reviews. If you're trying to find Alvord Polk 128-0 Cobalt Steel Chucking Reamer, Straight Flute, Round Shank, Uncoated Finish, Size: 1/4 Inch Oversize with discount deals. This is the simplest price for you. Where you could notice these item is by online searching stores? Read the review on Alvord Polk 128-0 Cobalt Steel Chucking Reamer, Straight Flute, Round Shank, Uncoated Finish, Size: 1/4 Inch Oversize Now, it's the simplest worth. Thus do not lose it.


Alvord Polk 128-0 Cobalt Steel Chucking Reamer, Straight Flute, Round Shank, Uncoated Finish, Size: 1/4 Inch Oversize
by Alvord Polk

New!: $22.50 $18.47 (as of 01/13/2013 13:10 PST)

Reamers

The Alvord Polk 128-0 straight flute chucking reamer (also called a machine reamer) is a general purpose round shank tool made of cobalt steel with no finish or coating, and is most commonly chosen for reaming in high-temperatures generated by machining tough, hard materials applications, or with abrasive materials. Cobalt steel tools are good for machining stainless steel and nickel alloys, which are harder and generate more heat through friction, giving cobalt a longer-lasting sharp edge than an equivalent high-speed steel tool. This tool can be used in a drill press, screw machine, lathe, or other good-quality toolholder.

Straight flute reamers are useful for uninterrupted cuts in general purpose applications. These reamers make small, circular, and precise enlargements to through and blind holes. Cobalt steel is commonly chosen to make tools with exceptional wear resistance and temperature stability, and can be fed at higher rates than high-speed steel, while being more economical than carbide.

For reamers in the 128-0 series with 0.0280 – 0.1561 inches diameter there are four flutes, for 0.1562 – 0.5220 inches diameter there are six flutes, for 0.5221 – 0.8820 inches diameter there are eight flutes, for 0.8821 – 1.1950 inches diameter there are 10 flutes, and for 1.1951 – 1.5000 inches diameter, there are 12 flutes. Tolerances are +0.0002 -0.0000 inches for all reamers in the 128-0 series except for those that are dowel-pin sized, in which case tolerances are +0.0000 -0.0002 inches.

Reamers are used to finish an existing hole. These holes are often adequate, but in some engineering applications the resulting hole is not round enough or is incorrectly sized, and therefore reaming is necessary. Reaming positively affects the mechanical properties of the hole by producing a hole with an exceptionally smooth finish and precise roundness and diameter. Reaming is often used before tapping screw threads.

Alvord Polk manufactures a broad family of cutting tools, brushes, and tooling components, following ISO 9001 standards for quality and environmental impact of their products. Their offices and manufacturing facilities have been located in the United States since 1881.

• Rank: #14622 in BISS
• Size: 1/4" Oversize (0.2510")
• Brand: Alvord Polk
• Model: 00239
• Number of items: 1

• Straight flute reamers are recommended for general purpose reaming to make minor enlargements to existing holes with a very precise size and roundness
• Straight flute reamers are good for use in through or blind holes without interruptions such as keyways (through holes extend through the entire workpiece, while blind holes do not)
• Round shank tools are cylindrical and should be held in a good-quality toolholder in order to prevent the reamer from slipping in high torque applications, which can cause tool freeze, loss of accuracy, and tool damage
• Uncoated (bright) tools have no finish or coating. They are a good choice for general purpose applications
• Cobalt steel is used for tough machining applications and on materials such as cast iron, cast steel and heat-treated steel. Cobalt steel resists abrasion and high cutting temperatures and has higher feed rates compared to high-speed steel

Alvord Polk 127-0 High-Speed Steel Chucking Reamer, Straight Flute, Round Shank, Uncoated Finish, Size: 1/4" and Letter Size E

Buy on the merchant's on-line looking and scan reviews. If you're trying to find Alvord Polk 127-0 High-Speed Steel Chucking Reamer, Straight Flute, Round Shank, Uncoated Finish, Size: 1/4" and Letter Size E with special deals. This is the simplest price for you. Where you may realize these item is by online shopping stores? Read the review on Alvord Polk 127-0 High-Speed Steel Chucking Reamer, Straight Flute, Round Shank, Uncoated Finish, Size: 1/4" and Letter Size E Now, it's the simplest value. Thus do not lose it.


Alvord Polk 127-0 High-Speed Steel Chucking Reamer, Straight Flute, Round Shank, Uncoated Finish, Size: 1/4" and Letter Size E
by Alvord Polk
(1)

New!: $16.70 (as of 01/13/2013 03:12 PST)

Reamers

The Alvord Polk 127-0 straight flute chucking reamer (also called a machine reamer) is a general purpose round shank tool made of high-speed steel with no finish or coating, and is most commonly chosen for general purpose reaming. This tool can be used in a drill press, screw machine, lathe, or other good-quality toolholder.

Straight flute reamers are useful for uninterrupted cuts in general purpose applications. These reamers make small, circular, and precise enlargements to through and blind holes. High-speed steel is a general purpose steel for cutting tools and is compatible with many metalworking materials. It is often lower in price than other cutting tool materials.

For reamers in the 127-0 series with 0.0280 – 0.1561 inches diameter there are four flutes, for 0.1562 – 0.5220 inches diameter there are six flutes, for 0.5221 – 0.8820 inches diameter there are eight flutes, for 0.8821 – 1.1950 inches diameter there are 10 flutes, and for 1.1951 – 1.5000 inches diameter, there are 12 flutes. Tolerances are +0.0002 -0.0000 inches for all reamers in the 127-0 series except for those that are dowel-pin sized, in which case tolerances are +0.0000 -0.0002 inches.

Reamers are used to finish existing holes. When holes are created using common applications like drilling or punching they often have minute imperfections. Their roundness may be flawed, or their diameter may be slightly smaller than required. Reamers are made to exacting tolerances, so they can correct such errors and create precisely round holes of exacting dimensions. Reaming is often used before tapping screw threads.

Alvord Polk manufactures a broad family of cutting tools, brushes, and tooling components, following ISO 9001 standards for quality and environmental impact of their products. Their offices and manufacturing facilities have been located in the United States since 1881.

• Rank: #5941 in BISS
• Size: 1/4 in
• Brand: Alvord Polk
• Model: 00110
• Number of items: 1

• Straight flute reamers are recommended for general purpose reaming to make minor enlargements to existing holes with a very precise size and roundness
• Straight flute reamers are good for use in through or blind holes without interruptions such as keyways (through holes extend through the entire workpiece, while blind holes do not)
• Round shank tools are cylindrical and should be held in a good-quality toolholder in order to prevent the reamer from slipping in high torque applications, which can cause tool freeze, loss of accuracy, and tool damage
• Uncoated (bright) tools have no finish or coating. They are a good choice for general purpose applications
• High-speed steel is a common general purpose steel for cutting tools, is compatible with a variety of materials, and tends to be lower in price than cobalt steel or carbide

Alvord Polk 127-0 High-Speed Steel Chucking Reamer, Straight Flute, Round Shank, Uncoated Finish, Decimal Size: 0.2605"

Buy on the merchant's online searching and read reviews. If you are making an attempt to search out Alvord Polk 127-0 High-Speed Steel Chucking Reamer, Straight Flute, Round Shank, Uncoated Finish, Decimal Size: 0.2605" with the simplest deal. This is the simplest price for you. Where you'll find these item is by on-line shopping stores? Read the review on Alvord Polk 127-0 High-Speed Steel Chucking Reamer, Straight Flute, Round Shank, Uncoated Finish, Decimal Size: 0.2605" Now, it's the simplest deals. Therefore do not lose it.


Alvord Polk 127-0 High-Speed Steel Chucking Reamer, Straight Flute, Round Shank, Uncoated Finish, Decimal Size: 0.2605"
by Alvord Polk
(1)

New!: $24.60 $24.11 (as of 01/12/2013 17:11 PST)

Reamers

The Alvord Polk 127-0 straight flute chucking reamer (also called a machine reamer) is a general purpose round shank tool made of high-speed steel with no finish or coating, and is most commonly chosen for general purpose reaming. This tool can be used in a drill press, screw machine, lathe, or other good-quality toolholder.

Straight flute reamers are useful for uninterrupted cuts in general purpose applications. These reamers make small, circular, and precise enlargements to through and blind holes. High-speed steel is a general purpose steel for cutting tools and is compatible with many metalworking materials. It is often lower in price than other cutting tool materials.

For reamers in the 127-0 series with 0.0280 – 0.1561 inches diameter there are four flutes, for 0.1562 – 0.5220 inches diameter there are six flutes, for 0.5221 – 0.8820 inches diameter there are eight flutes, for 0.8821 – 1.1950 inches diameter there are 10 flutes, and for 1.1951 – 1.5000 inches diameter, there are 12 flutes. Tolerances are +0.0002 -0.0000 inches for all reamers in the 127-0 series except for those that are dowel-pin sized, in which case tolerances are +0.0000 -0.0002 inches.

Reamers are used to finish existing holes. When holes are created using common applications like drilling or punching they often have minute imperfections. Their roundness may be flawed, or their diameter may be slightly smaller than required. Reamers are made to exacting tolerances, so they can correct such errors and create precisely round holes of exacting dimensions. Reaming is often used before tapping screw threads.

Alvord Polk manufactures a broad family of cutting tools, brushes, and tooling components, following ISO 9001 standards for quality and environmental impact of their products. Their offices and manufacturing facilities have been located in the United States since 1881.

• Rank: #14361 in BISS
• Size: 0.2605"
• Brand: Alvord Polk
• Model: 10532
• Number of items: 1

• Straight flute reamers are recommended for general purpose reaming to make minor enlargements to existing holes with a very precise size and roundness
• Straight flute reamers are good for use in through or blind holes without interruptions such as keyways (through holes extend through the entire workpiece, while blind holes do not)
• Round shank tools are cylindrical and should be held in a good-quality toolholder in order to prevent the reamer from slipping in high torque applications, which can cause tool freeze, loss of accuracy, and tool damage
• Uncoated (bright) tools have no finish or coating. They are a good choice for general purpose applications
• High-speed steel is a common general purpose steel for cutting tools, is compatible with a variety of materials, and tends to be lower in price than cobalt steel or carbide

2.0 MM HIGH SPEED STEEL, METRIC SIZE, STRAIGHT SHANK, CHUCKING REAMER, STRAIGHT FLUTE

Buy on the merchant's website searching and browse reviews. If you're attempting to seek out 2.0 MM HIGH SPEED STEEL, METRIC SIZE, STRAIGHT SHANK, CHUCKING REAMER, STRAIGHT FLUTE with special deals. This is the most effective deals for you. Where you could find these item is by online searching stores? Read the review on 2.0 MM HIGH SPEED STEEL, METRIC SIZE, STRAIGHT SHANK, CHUCKING REAMER, STRAIGHT FLUTE Now, it's special price. Thus do not lose it.


2.0 MM HIGH SPEED STEEL, METRIC SIZE, STRAIGHT SHANK, CHUCKING REAMER, STRAIGHT FLUTE
by B.

New!: $3.40 (as of 01/12/2013 07:03 PST)

Reamers

A rotary cutting tool with one or more cutting elements, used for enlarging to size and contour of a previously formed hole.

• Rank: #76215 in Home Improvement
• Brand: B.

• Premium Import!
• Quality and Performance to satisfy you!
• Right Hand Cut
• Flute Length: 3/4"
• Overall Length: 3"

Alvord Polk 827-0 Solid Carbide Reamer, CNC (Short) Length, Straight Flute, Round Shank, Uncoated Finish, Size: 1/2 Inch Oversize

Buy on the merchant's on-line shopping and read reviews. If you're trying to seek out Alvord Polk 827-0 Solid Carbide Reamer, CNC (Short) Length, Straight Flute, Round Shank, Uncoated Finish, Size: 1/2 Inch Oversize with the simplest price. This is the simplest price for you. Where you could find these item is by on-line looking stores? Read the review on Alvord Polk 827-0 Solid Carbide Reamer, CNC (Short) Length, Straight Flute, Round Shank, Uncoated Finish, Size: 1/2 Inch Oversize Now, it's the simplest deal. So do not lose it.


Alvord Polk 827-0 Solid Carbide Reamer, CNC (Short) Length, Straight Flute, Round Shank, Uncoated Finish, Size: 1/2 Inch Oversize
by Alvord Polk

New!: $125.00 $113.51 (as of 01/11/2013 21:27 PST)

Reamers

The Alvord Polk 827-0 right-hand spiral CNC length chucking reamer is a round shank tool made of tungsten carbide, and is most commonly chosen for reaming abrasive materials such as cast iron. This tool is meant for use in a CNC machine at high rpms with reduced vibration and increased accuracy compared to a longer tool. Less vibration means more precision.

Straight flute reamers are useful for uninterrupted cuts in general purpose applications. These reamers make small, circular, and precise enlargements to through and blind holes.

For reamers in the 827-0 series with 0.0280 to 0.1910 inches diameter there are four flutes, and for 0.1915 to 0.5010 there are six flutes. Tolerances are +0.0002 -0.0000 inches for all reamers in the 827-0 series.

Reamers are used to finish existing holes. When holes are created using common applications like drilling or punching they often have minute imperfections. Their roundness may be flawed, or their diameter may be slightly smaller than required. Reamers are made to exacting tolerances, so they can correct such errors and create precisely round holes of exacting dimensions. Reaming is often used before tapping screw threads.

Alvord Polk manufactures a broad family of cutting tools, brushes, and tooling components, following ISO 9001 standards for quality and environmental impact of their products. Their offices and manufacturing facilities have been located in the United States since 1881.

• Rank: #13845 in BISS
• Size: 1/2" Oversize (0.5010")
• Brand: Alvord Polk
• Model: 08124
• Number of items: 1

• Straight flute reamers are recommended for general purpose reaming to make minor enlargements to preformed holes with a very precise size and circularity
• Straight flute reamers are good for use in through or blind holes without interruptions such as keyways (through holes extend through the entire workpiece, while blind holes do not)
• CNC length tools are generally shorter than other machine tools. The shorter length makes for a more rigid tool, which minimizes vibration at the higher rpms available with CNC machines
• Round shank tools are cylindrical and should be held in a good-quality toolholder in order to prevent the reamer from slipping in high torque applications, which can cause tool freeze, loss of accuracy, and tool damage
• Carbide resists abrasion and high cutting temperatures. It can run at higher speeds and is harder than high-speed steel

HSS 7.0 MM Chucking Reamer - Straight Shank, Straight Flute

Buy on the merchant's on-line searching and scan reviews. If you're trying to find HSS 7.0 MM Chucking Reamer - Straight Shank, Straight Flute with discount deals. This is the simplest price for you. Where you could realize these item is by on-line searching stores? Read the review on HSS 7.0 MM Chucking Reamer - Straight Shank, Straight Flute Now, it's special value. So do not lose it.


HSS 7.0 MM Chucking Reamer - Straight Shank, Straight Flute
by Meda - Superior Import

New!: $9.30 (as of 01/11/2013 12:19 PST)

Reamers

For general purpose reaming to close tolerances. Also known as Machine Reamers.

• Rank: #16965 in BISS
• Brand: Meda - Superior Import

• High Speed Steel
• 31 MM Flute Length
• 109 MM Overall Length
• 7.1 MM Shank Diameter

Alvord Polk 127-0 High-Speed Steel Chucking Reamer, Straight Flute, Round Shank, Uncoated Finish, Decimal Size: 0.2595"

Buy on the merchant's online shopping and read reviews. If you are trying to seek out Alvord Polk 127-0 High-Speed Steel Chucking Reamer, Straight Flute, Round Shank, Uncoated Finish, Decimal Size: 0.2595" with discount deals. This is the simplest deals for you. Where you could notice these item is by on-line searching stores? Read the review on Alvord Polk 127-0 High-Speed Steel Chucking Reamer, Straight Flute, Round Shank, Uncoated Finish, Decimal Size: 0.2595" Now, it's discount value. Therefore don't lose it.


Alvord Polk 127-0 High-Speed Steel Chucking Reamer, Straight Flute, Round Shank, Uncoated Finish, Decimal Size: 0.2595"
by Alvord Polk
(1)

New!: $24.60 (as of 01/11/2013 02:00 PST)

Reamers

15mm Dia. Metric Size Straight Shank/Flute Chucking Reamer (1 Each)

Buy on the merchant's website shopping and read reviews. If you're trying to find 15mm Dia. Metric Size Straight Shank/Flute Chucking Reamer (1 Each) with special deals. This is the simplest deal for you. Where you'll realize these item is by online shopping stores? Read the review on 15mm Dia. Metric Size Straight Shank/Flute Chucking Reamer (1 Each) Now, it's discount value. So don't lose it.


15mm Dia. Metric Size Straight Shank/Flute Chucking Reamer (1 Each)
by RSC

New!: $27.19 (as of 01/10/2013 12:37 PST)

Reamers

• Rank: #113020 in BISS
• Brand: RSC
• Dimensions: .38 pounds

5/16 HIGH SPEED STEEL, STRAIGHT SHANK, CHUCKING REAMER, STRAIGHT FLUTE

Buy on the merchant's online looking and browse reviews. If you're trying to search out 5/16 HIGH SPEED STEEL, STRAIGHT SHANK, CHUCKING REAMER, STRAIGHT FLUTE with the simplest deal. This is the most effective price for you. Where you may find these item is by on-line searching stores? Read the review on 5/16 HIGH SPEED STEEL, STRAIGHT SHANK, CHUCKING REAMER, STRAIGHT FLUTE Now, it's the simplest deals. Thus do not lose it.


5/16 HIGH SPEED STEEL, STRAIGHT SHANK, CHUCKING REAMER, STRAIGHT FLUTE
by B.

New!: $5.50 (as of 01/10/2013 03:23 PST)

Reamers

A rotary cutting tool with one or more cutting elements, used for enlarging to size and contour of a previously formed hole.

• Rank: #148760 in Home Improvement
• Brand: B.

• Premium Import!
• Quality and Performance to satisfy you!
• Right Hand Cut
• Flute Length: 1-1/2"
• Overall Length: 6"